Your present location:Products >> DISEGNO WALL PAINTS >> LAGUNA3.0 BASE DEEP - Standard Paints
  • Products: LAGUNA3.0 BASE DEEP - Standard Paints
  • Views : 28
  • 普通会员Price :
  • 高级会员Price :
  • VIP会员Price :

Immediate Inquiry

LAGUNA 3.0 is a odorless washable water based wall paint that allows to obtain finishes with a high whiteness and very matt properties.
The formulation based on innovative acrylic polymers VOC free and APEO free gives the product high resistance to washing.
Designed for the needs of professionals, with very small spurt in the application by roller, it achieves particularly unvarying finishes, even with the colors obtained by tinting machine.
May be applied on:
- New and old plasters based on hydraulic binders.
- Concrete surfaces.
- Gypsum and gypsumboard surfaces.
- Old paints and wall coatings of organic or mineral in nature, dry, compact, absorbent and cohesive.
Mineral conglomerates of various kinds, as long as they are absorbent.
Surfaces should be adequately prepared by following the instructions given in the paragraph 'PREPARING THE SURFACE'.
Do not apply on freshly painted surfaces.
- Type of Binder: acylic polymer in aqueous dispersion
- Classification per UNI EN 13300:
-Wet-scrub resistance per ISO 11998: class 3
-Gloss per EN ISO 2813: <5, matt
-Hiding power per ISO 6504-3: class 1 on 7 mq/l spreading rate
Other characteristics
- Specific gravity per UNI EN ISO 2811-1: 1,59 ± 0,05 kg/l
Viscosity per UNI 8902: 25000 ± 4500 cps at 30 °C (Brookfield viscometer)
Wet-scrub resistance per UNI 10560: >2000 cycles, resistant
- Drying time (at 25 °C and 65% R.H.): to touch in 1 hour; to recoat after 3 hours.
-Resolution of volatile organic compounds (VOC) ISO 11890-2:2013: 0.011%
-Resolution of free Formaldehyde EPA 8315A:1996: 0.15 mg/kg
Wall and ceiling surfaces:
Make sure that the surface is thoroughly dried and aged. Resurface or consolidate using specific products if necessary.
-If mold is present, treat the surface with cleanser, and with reconstruction products. To protect the wall from mold formation add a sanitizer to the product.
- Brush or wash to remove any efflorescence and any old peeling paint. Completely eliminate any raised layers of lime-based or tempera paints.
- Remove any dust, smog or other deposits by brushing.
-Level any irregularities in the surface and treat holes, cracks, crevices and gaps; Sand putty and touch-ups with sandpaper.
- Use adequate sealants to seal any cracks.
Smooth if necessary according to the type of support.
-On a clean, dry surface apply one coat of  ATOMO acrylic water-based. On gypsumboard, apply the specific fixative. In the presence of thin layers of old tempera or chalking paints, apply one coat of solvent-based wall fixative micronized solvent-free fixative.
(The dilution of the fixative and amounts to be applied depend on the absorption of the support surface, and must be determined through preliminary tests on the specific support surface - See the relevant technical data sheet).
- Air and support surface conditions:
-Air temperature: Min. +8 °C / Max. +35 °C Relative environmental humidity: <75%
-Support surface temperature: Min. +5 °C / Max. +35 °C Moisture level of the support surface: <10%
Avoid applying when surface condensation is present, or in direct sunlight.
- Tools: brush, roller, spray gun or airless.
- N coats: at least 2 coats of the product should be applied.
- Diluting: with water. By brush: first coat at 40-45%, second coat at 30%. By roller at 15-20%.
When spraying and airless spraying thinning varies depending on the unit and operating pressure used.
Tools should be cleaned immediately after use using water.
Indicative spreading rate: 8-10 sqm/l per coat based on smooth surfaces featuring average absorption. It is advisable to determine the actual spreading rate by carrying out a preliminary test on the specific surface.
The product may be tinted by RWserie products.
When using multiple batches it is recommended to remix the various products together to avoid slight differences in shading.
Temperature for storage stability: from +5 °C to +30 °C
The product should be preferably used within 2 years from date of manufacture when stored in original unopened containers and in appropriate temperature conditions.
Limit value EU (Dir. 2004/42/EC)
Cat. A/a: Matt coatings for interior walls and ceilings (gloss <[email protected]°) (water-base): 30 g/l (2010)
LAGUNA 3.0 contains max: 30 g/l VOC
Use the product according to current health and safety regulations; after use, do not discard the containers in the environment; allow the residue to dry thoroughly, then treat as special waste. Store out of the reach of children. In caso of ingestion, see a physician immediately and show him or her the container or label. Do not dispose of residues in the sewers, waterways or ground. For more information consult the safety data sheet.
Odorless matt washable water based wall paint for interiors application, on previously prepared surfaces, of washable water based wall paint LAGUNA 3.0 360 series based on acrylic polymers in aqueous dispersion, in at least 2 coats of a quantity determined by the absorption of the substrate.